Kwik-Klamps

KWIK KLAMP1 holding 2" stainless steel pipe on 8" casing.The wide klamp base fits on many casing sizes.

Easy one hand operation.

Size adjustment and tension bolt located inside of front jaw protected from dirt and water.

A = 13” long when closed with jaws together

12” Length of inside slide tube.

B = 5”

Kwik Klamp 1 Jaw Set with Bolts (1")

Kwik Klamp 1 Jaw Set with Bolts (1.25")

Kwik Klamp 1 Jaw Set with Bolts (2")

The heavy duty KWIK KLAMP 2 is the driller's answer for holding the larger pipe sizes 2 1/2", 3", and 4".  KWIK KLAMP 2 is an enlarged version of our popular KWIK KLAMP 1, which is for pipe sizes 1" through 2", with many of the same features.  This tool has been used worldwide by environmental drillers, pump installers, well servicemen, and water well drillers.

• Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube.

• Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle.

• 1/2" safety pin used to prevent accidental unclamping.

• KWIK KLAMP2 allows workers to bring pipe or drill joint up to an easy working level.

• The tool weighs only 30 lbs. and is 20" long x 7 1/2" wide.

• Jaws are equipped with 16 carbide-tipped grippers.

• Excellent holding capability, with load tests done over 7,000 lbs.

• Designed to hold pipes 2 1/2", 3" and 4" PVC, HDPE, stainless, and galvanized steel.

• KWIK KLAMP is one of the safest, time-saving tools you will ever own.

• Especially designed for holding 2" and 2 1/2" pipe using the KWIK KLAMP 2.

• Increased holding capacity.

• Set of 4 serrated hardened jaws with bolts.

• Additional (4) spacers can be purchased to accommodate 4 1/2" pipe.

• Spacers will be placed on the middle two jaw pads on each side.

* * * Kwik Klamp 3 for holding PVC pipe. * * *

The heavy duty KWIK KLAMP 3 is designed to hold 6" PVC pipe. This Klamp can also hold 5" pipe with an additional jaw set. The KWIK KLAMP 3 is very similar to the KWIK KLAMP 2, which is for pipe sizes 2 1/2" through 4". The Kwik Klamp has been used worldwide by environmental drillers, pump installers, well servicemen, and water well drillers.

• Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube.

• Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle.

• 1/2" safety pin used to prevent accidental unclamping. 

• KWIK KLAMP 3 allows workers to bring pipe or drill joint up to an easy working level.

• The tool weighs only 37 lbs. and is 20" long x 7 1/2" wide.

• Jaws are equipped with 20 carbide-tipped grippers (3/8-16x1/2).

• Excellent holding capability, with load tests done over 7,000 lbs.

• Designed to hold 6" PVC or HDPE pipe.

• KWIK KLAMP is one of the safest, time-saving tools you will ever own. 

Kwik Klamp 3 for 5" PVC Pipe

The Kwik Klamp 3 is also capable of holding 5" PVC pipe with the addition of jaw pads and bolts.

Conversion kit for 5" Pipe includes 10 jaw pads and 20 3/8-16x1 carbide-tipped gripper bolts.