Call us Monday - Friday 7am - 5pm PST
(800) 800-8444 or (775) 355-1199

LXQ SD10 Hammer (10")

$13,440.00

Be the first to review this product

OR
  • Add to Wishlist
  • | Add to Compare
  • DESCRIPTION
  • REVIEWS

  • Missile LXQ Series - LXQM10000 10" Hammer SD10 Shank

    Hammer Specifications - SD10 Shank

    Main Features

    • Manufactured from the finest steel available in today's market

    • Several different types of stress-relieving and heat-treatment processes are performed on these hammers

    • Carburizing of the piston makes for long-lasting products

    • Hardness of 60 HRC

    • Back reaming carbides on 6” Models

    • No make-up rings to replace

    • No shims

    • Easy to service

    • Fast performance, unparalleled

    • Runs excellent under water

    • Handles injection of foam and polymers, without affecting performance

    Item #

    Description

    Part #

    1

    Back Head

    LQ1001

    2

    Back Head O-Ring

    LQ1002

    3

    Back Head Washer

    LQ1003

    4

    Choke

    		  

    5

    Air Check Valve

    LQ1005

    6

    Air Check Valve Spring

    LQ1006

    7

    Make-Up Rubber (Buffering)

    LQ1007

    8

    Air Distributor

    LQ1008

    9

    Air Distributor O-Ring

    LQ1009

    10

    Cylinder

    LQ1010

    11

    Wear Sleeve

    LQ1011

    12

    Piston

    LQ1012

    13

    Piston Stop Ring

    LQ1013

    14

    Bit Retaining O-Ring

    LQ1014

    15

    Bit Retaining Ring

    LQ1015

    16

    Chuck Washer

    LQ1016

    17

    Chuck (Drive Sub)

    LQ1017
     

    Choke Plug Kit

    LQ1029
     

    O-Ring Kit

    LQ1030

    Features:

     

    • Easy to service

    • Special heat-treated alloy piston for long life, Rockwell hardness 60

    • Reversible wear sleeve

    • Minimum loss of performance when injecting foam or water; drills well under water
     

    Length (w/o drill bit)

    60.27"

    Outside Diameter

    8.858"

    Weight (w/o bit)

    719.6 lbs.

    Cylinder Bore

    6.853"

    Piston O.D.

    6.849"

    Piston Stroke

    4.13"

    Piston Weight

    125.7 lbs.

    Hole Sizes

    10" - 14"

    Air Pressure Consumption

    100 psi - 250 psi

    Wrench Size

    A/F 7.264"

    Connection

    Std. 6 5/8" API Reg Pin

     


    Air Consumption Chart

    PSI

    100

    150

    200

    250

    300

    350

    CFM with blank choke

    398

    652

    944

    1,218

    1,473

    1,665

    with 1/8" choke

    415

    678

    975

    1,257

    1,565

    1,720

    with 1/4" choke

    463

    744

    1,011

    1,312

    1,640

    1,850


    All Hammers come Fitted with Blank Choke located in the Dart Valve

    Lubrication

    The Missile LXQ Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 2 Pints per 100 cfm per hour / measured up to 1000 cfm.

    Recommended Grades of Lubricant

    ESSO
    MATEX
    CASTROL
    SHELL
    MOBILE

    AROX EP 150
    RDO 302
    RD OIL DP 100
    AIR TOOL OIL S2 A 320
    ALMO NO. 5

    Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

    Recommended Pull Down

    Minimum @ 100 psi - 2570 lbs.

    Maximum @ 350 psi - 8900 lbs.


    Missile Warranty will be voided by the following:

    1. Welding on Wear Sleeve.

    2. Heating Case with a Torch.

    3. Gripping Wrenches across Threads.

    4. Hammering on Casing.

    READ WARNING LABEL ATTACHED TO HAMMER.